点击图片查看大图
用途及作用：
积成防锈剂广泛应用于模具、工件、金属制品、机械等。喷上防锈剂后在金属表面形成一层防锈软油膜，起到润滑、防锈、防指纹及不会防碍精密装配等功能。
本品特别适用于生产及存放中的塑胶模具，防锈膜在注塑过程中自动清除，但在使用之前清洗模具，有更佳的效果。本品环保无任何有害物质、桂花香型。
绿色：喷涂后金属表面有一层绿色油膜。
白色：喷涂后金属表面有一层白色油膜。
透明：喷涂后金属表面有一层透明油膜。
用法：使用前将金属部件清洁干净、用风枪吹干，摇匀本品从相距喷件25厘米处轻按喷头均匀喷射即可。
注意：本品属于第四代石油类制品，请勿靠近火源，避免强阳光 长久直射，贮存在50C以下阴凉干燥处，长时间贮放一层不能超过8箱，如不慎射入眼睛，请用清水清洗。
第三方质量控制：SGS RoHS PAHs MSDS SVHC 16P 卤素 TBBP-A认证
名称：防锈剂
类别：绿色、白色、透明三种性质
包装：24瓶/箱
含量：500ML
450ML两种容量
500ML单瓶重量：370克
450ML单瓶重量：350克
500ML纸箱尺寸：41.5X28X22.5cm
450ML纸箱尺寸：41X27.5X21cm
The products are widely used in mold, metal products, machinery parts. Spray with anti-rust agent after the metal surface to form a layer of soft film antirust, lubrication, rust-proof, to prevent a fingerprint and does not hinder precise assembly function.
This product is especially suitable for the production and storage of plastic mold, rust-proof membrane in the process of injection molding of automatic clearance, but before use clean mold, with better results. This product is environmentally friendly without any harmful substances, the osmanthus flower.
Green: after spraying metal surface has a layer of green oil film.
White: after spraying metal surface has a layer of white film.
Transparent: after spraying metal surface has a layer of transparent film.
Usage: use before the metal parts clean, dry air gun, shake this from 25 cm apart spray pieces of light by sprinklers evenly spray can.
Note: This product is the fourth generation of petroleum products, please keep away the fire, avoid long sun point-blank, stored in the 50C following a cool and dry place,
Long time storage layer can not be more than 8 boxes, such as accidentally into eyes, please rinse with clear water.
Name: antirust agent
Categories: green white transparent three properties
Packing: 24 bottle / box
Content: 500ML
450ML two kinds of capacity
500ML single bottle weight: 370 gram
450ML single bottle weight: 350 gram
Carton size: 41.5X28X22.5cm 500ML
Carton size: 41X27.5X21cm 450ML
